PCA Gold provides multi-season protection against hard and soft growth.PCA Gold is a premium ablative antifouling coating that provides multi-season protection. The combination of cuprousoxide and an anti-slime additive provides first-rate protection against shell, weed and slime fouling. Apart from keeping hulls free of marine growth, the slow wearing formula reduces paint build-up which means you wont have to sand as much when the time comes to repaint. And because the antifouling effectiveness of PCA Gold is not affected by exposure to air, on your next haulout, after applying PCA Gold, youll have an unlimited window to launch. PCA Gold can be applied on to fiberglass, wood and properly primed steel hulls. Do not apply to aluminum hulls. Key features Self-polishing finish reduces paint buildup Can be hauled and re-launched without repainting Multi-season protectionSuitable for all boats in all watersNot for application to aluminum hulls Physical Data Vehicle type: Copolymer ablative with slime resistance Finish: Matte Available colors: Blue, Green, Red, Black, Components: 1 Curing mechanism: Solvent release Coverage: 400sq. ft./gal. VOC: 330 grams/liter Active ingredients: 47.5% Cuprous Oxide Application Application Method: Brush, roller, airless, or conventional spray Number of coats recommended: 2 coats, 3 on bare wood (first coat thinned) Wet Film Thickness: 3.6 mils/coat Dry Film Thickness: 2 mils/coat Applicator: High-quality short nap roller (maximum 3/16” nap) Application temperature Min. /Max. Range: 10C/50F and maximum 35C/95F. Thinner: West Marine Thinner 5437207, or Pettit 120 brushing thinner Drying Times* (Hours) Drying @50F @70F @90F